Tubes & Pipes Testing

HomeTesting & Analysis

Hose Testing
Tube testing laboratory

hose-testingMAEON Laboratories are pioneers in conducting Hose testing, Tube testing, Pipe testing for various industrial, agricultural, water and fuel transfer, domestic product applications The range of tests required for hose and pipe testing include those carried out directly on the product and tests made on the materials used for the Hose/Pipe products.

hose-testingWe specialize in product testing laboratory, where products are evaluated and ensured to meet your quality, safety, and regulatory standards. Our laboratories have advanced equipment and experts who conduct tests to analyze performance, durability, chemical composition, and reliability. The results of these tests help your business to improve products, enhance customer satisfaction, and comply with industry regulations. Product testing laboratories play a vital role in ensuring high-quality products and protecting consumers.

hose-testingTube testing laboratory is gradually being phased out of normal hospital pretransfusion testing in favor of gel and solid-phase testing, as it is deemed less sensitive than more current methods.

hose-testingPlastic pipe testing is required throughout the manufacturing process of various pipes as as PVC, HDPE, and others. During the production process, this testing is necessary to determine the objects' strength, quality, and resistance.There are a variety of tests that must be performed on PVC pipe testing, and we offer a variety of equipments that can produce accurate findings.

hose-testingHDPE pipe testing is a flexible plastic pipe that is used to transport fluids and gases. It is frequently utilised to replace ageing concrete or steel mains pipes. Its high level of impermeability and strong molecular bond make it suited for high pressure pipelines, and it is made from the thermoplastic HDPE.

Hose and Tubes - Testing
The different tests conducted for Hoses and Tubings are their Internal and external Dimensions, Mechanical Properties, Pressure testing, static and dynamic and vacuum, Fuel, air, water permeability, Envirnoment tests, Thermal ageing properties, Hot and cold, Flame resistance, electrical properties and Odour tests etc.
Some of National, International standards to which the hose testing and tube testing are conducted at MAEON Labortatories listed above.
Hose and Tubes - Testing

 

Hose and Tubes - Testing

ASTM D380, ISO 1402, ISO 6605, ISO 4642, ISO 10619, ISO 1825, ISO 1825, SAE J343, SAE J2260,SAE AS1472, SAE AS4468F, SAE J343, SAE AS1472A, IS 7651, IS 7593, IS 15913
Mechanical Test
Mechanical Test
  Tensile Strength & Elongation  
  Adhesion  
  Twist  
  Warp  
  Rise  
  Kink Test  
  Volumetirc Expansion  
  OD Expansion  
  Tension Test  
Permeability tests
Permeability tests
  Permeability test  
  Fuel Permeation  
  Permiability to gas  
Electrical tests
Electrical tests
  Electrical Conductivity  
  Electromechanical degradation  
  Electrochemical degradation  
Pressure Test
Pressure Test
  Hydrostatic Pressure Test / Leakage  
  Elongation & Contraction  
  Proof Pressure  
  Hold Test  
  Bursting Test  
  Vacuum Test  
Thermal Propeties – Hot and Cold
Thermal Propeties – Hot and Cold
  Low Temperature Test on hose  
  Low Temperature Test on tube & Cover  
  Strength Deterioration  
  Air Aging Test  
Flammability tests
Flammability tests
  Flame Resistance test  
Environmental Properties
Environmental Properties
  Immersion / Oil Resistance  
  Chlorine and detergent test  
  Odor and Taste test  
  Water absorption  
  Fungus Test  
  Resistance to Zinc Chloride  
  Methanol Fuel Resistance  
  Auto Oxidised Gasoline  
Weathering Tests
Weathering Tests
  Ozone test  
  Resistance to steam  
  Exposure to Xenon / UV  
Odour tests
Odour tests
  Odor and Taste Tests  
PRODUCT SPECIFICATION TEST
Maeon Laboratories offer testing services for product approval / validation to national and international standards for Hoses and polymeric tubings. Some of types of hose testing, rubber hose testing, plastic hose testing, rubber tubes testing, plastic tube testing include products for water, air, fuel hoses, hy pressure hydraulic hoses, pneumatic hoses and agricultural hoses.
PRODUCT SPECIFICATION TEST
HP1PR-1 Rubber Water Hose IS 444 : 1987 PCD 13
HP1PR-2 Rubber Air Hose IS 446 : 1987
HP1PR-3 Rubber Hose For Welding IS 447 : 1988 PCD 13
HP1PR-4 Rubber Hose For Fuel Dispensing IS 2396 : 1988 PCD 13
HP1PR-5 Water suction and discharge hose
of rubber, heavy duty covers
IS 2410:1963
HP1PR-6 RUBBER HOSE FOR SAND BLASTING IS 5894 : 1980 PCD 13
HP1PR-7 RUBBER HOSE FOR LIQUEFIED
PETROLEUM GAS (LPG)
IS 9573 : 1998 PCD 13
HP1PR-8 High pressure hydraulic hose
for Underground mining
BSC-174-1992
HP1PR-9 Flexible Rubber Tubing For
Liquefied Petroleum
IS 10908 : 1991 PCD 13
HP1PR-10 Thermoplastic hoses (textile reinforced)
for water genral purpose
IS 12585 : 1988 PCD 13
HP1PR-11 Rubber hoses and hose assemblies.
Rubber-covered spiral wire
reinforced hydraulic type.
EN 856 - 1996
HP1PR-12 HIGH PRESSURE FIRE FIGHTING HOSE IS 14933 : 2001 CED 22
HP1PR-13 Electrically Bonded Road and Rail
Tanker Hose of Rubber, Resistant to
Petroleum Products
IS-10733 - 1983
HP1PR-14 Rubber hose for LPG IS 9573:2012
HP1PR-15 Wire reinforced rubber covered hydraulic hose IS 7651:1997
HP1PR-16 Non-percolatng flexible fire fighting delivery hose IS 636
HP1PR-17 Wire-braid-reinforced hydraulic types for oil-based or water-based fluids, Rubber hoses and hose assemblies — Specification ISO 1436 : 2017
HP1PR-19 Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases ISO 5359 :2014
HP1PR-20 Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification ISO 4079
HP1PR-21 Rubber hoses for sand and grit blasting — Specification ISO 3861:1995
HP1PR-22 Wire-braid-reinforced compact types for hydraulic applications ISO 11237-1
HP1PR-23 Fire resistant fuel hose ISO 7840
HP1PR-24 Nonmetallic fuel sytem tubing with one or more layers SAE J 2260 : 2004
HP1PR-25 Rubber Hoses for Agricultural Spraying IS 1677:2018
HP1PR-26 Polyurethane tubing for use primarily in pneumatic installations ISO/TS 11619:2014
HP1PR-27 Rubber hoses and hose assemblies — Wire- or textile-reinforced single-pressure types for hydraulic applications — Specification ISO 18752: 2014
HP1PR-28 Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification ISO 4079:2015
HP1PR-29 Rubber heater and fuel hoses SAE 20R1
Pipes - Product & Material Testing
Testings differ for pipes depending on their end use. All critical tests for various types of polymeric pipes, of materials such as HDPE, PP, PVC, UPVC, CPVC etc. are conducted to customer specifications and to National and international standards. A brief of the tests and standards followed by Maeon Laboratories, potable water, hot and cold, high pressure water/ liquid lines, gaseous fuels, underground drainage, are listed above
Testing for Pipes
ASTM D2886    
ISO 1452-2    
IS 12235, IS 14885, IS 4984, IS 4985, IS 15328, IS 12786, IS 12701, IS 15778    
Tensile and compression tests
Tensile and compression tests
HP1ME-40 Tensile & Elongation properperties  
HP1FN Compression test for pipes ASTM D2412
HP1FN-17 Flattening Test  
Pressure tests
Pressure tests
HP1FN-24 Burst Pressure  
HP1FN-11 Resistance to Internal Hydrostatic Pressure at Constant internal Water Pressure  
HP1FN-15 Resistance to external blows (impact resistance) at o'c  
Creep test
Creep test
HP1FN-18 Internal Pressure Creep Rupture Test  
  Creep test, Tensile creep, Flexural creep test ISO 899-2
Environmental property test
Environmental property test
HP1EN-4 Effect on the composition of water  
HP1EN-5 Resistance to sulfuric acid  
Weatherability property test
Weatherability property test
HP1WE-2 Effect of sunlight  
PE1WE-4 Resistance to weathering  
Other tests for Pipes
Other tests for Pipes
HP1FN-19 Longitudinal reversion test  
HP1FN-20 Axial Shrinkage  
HP1MT-15 Organotin as tin aqueous solution  
HP1MT-16 Resistance to dichloromethane at specified temperature  
HP1MT-17 Titanium dioxide content  
HP1MT-20 Overall migration  
HP1MT-21 Density  
HP1MT-25 Pigment dispersion  
HP1MT-18 Vinyl Chloride monomer content  
HP1MT-19 Ash and Sulphated ash  
HP1ME-42 Adhesion  
HP1MT-22 Carbon Black Dispersion and content  
HP1MT-24 Volatile Matter Content  
HP1MT-23 Oxidation Induction Time  
HP1OP-2 Opacity  
HP1TH-7 Vicat Softening Temperature  
HP1TH-8 High Temperature Test  
HP1TH-9 Melt Flow Rate  
Joint /Sealing ring tightness
HP1FN-12 Leak-tightness of Elastomeric Sealing Ring T- Angular Deflection“  
HP1WE-3 Water tightness of joint  
HP1FN-16 Ring Stiffness  
PRODUCT SPECIFICATION TEST
Quality of Rigid and Flexible Pipes are essential for their long term trouble free performance. Maeon Laboratories offers testing PVC pipe testing services for product approval/validation to national and international standards for pipes and pipe fittings. Some of standards covering different types of Pipes for which Maeon has facility to test are listed above.
PRODUCT SPECIFICATION TEST
HP1PR-30 PVC pipesfor potable Water IS 4985
HP1PR-31 HDPE pipes for potable water IS 4984
HP1PR-32 Unplasticized Polyvinyl Chloride (UPVC) Single Wall Corrugated Pipes for Drainage IS 9271
HP1PR-33 Irrigation Equipment--Polyethylene Pipes for Irrigation IS 12786
HP1PR-34 PVC PIPE - POTABLE HOT AND COLD WATER IS 15778
HP1PR-35 Thermoplastics Pipes and fittings IS 12235-1
HP1PR-36 POLYETHYLENE PIPES FOR THE SUPPLY OF GASEOUS FUELS IS 14885 : 2001 CED 50
HP1PR-37 Non-pressure Pvc -U -Underground drainage and sewerage systems IS 15328 : 2003
HP1PR-38 CHLORINATED PVC PIPES FOR POTABLE HOT AND COLD WATER DISTRIBUTION SUPPLIERS IS 15778 : 2007 CED 1
HP1PR-39 POLYPROPYLENE-RANDOM COPOLYMER PIPES FOR HOT AND COLD WATER SUPPLIES IS 15801 : 2008 CED 50